Honda NSS250S Manual page 17

STANDARD TORQUE VALUES
FASTENER TYPE
5 mm bolt and nut
6 mm bolt and nut
(Include SH flange bolt)
8 mm bolt and nut
10 mm bolt and nut
12 mm bolt and nut
ENGINE & FRAME TORQUE VALUES
• Torque specifications listed below are for specified fasteners.
• Others should be tightened to standard torque values listed above.
FRAME/BODY PANELS/EXHAUST SYSTEM
ITEM
Exhaust pipe stud bolt
Exhaust pipe joint nut
Left inner box lid screw
Left inner rail screw
Left outer box screw
Left outer rail screw
Seat hinge cover screw
Seat hinge nut
Damper stay bolt
Tail cap cover stay bolt/washer
Tail cap cover socket bolt
Parking brake lever nut
Front fender socket bolt
Muffler band bolt
Muffler protector bolt
Muffler mounting bolt
Luggage upper box screw
Reflector nut
Right inner box lid screw
MAINTENANCE
ITEM
Air cleaner cover screw
Left side front cover socket bolt
Left side rear cover socket bolt
Element cover bolt
Engine oil drain bolt
Final reduction oil check bolt
Final reduction oil drain bolt
Oil filter boss
Oil filter cartridge
Spark plug
Sidestand pivot nut
Sidestand pivot bolt
maxiscooter-club.ru
TORQUE
N·m (kgf·m, lbf·ft)
5.2 (0.5, 3.8)
10 (1.0, 7)
22 (2.2, 16)
34 (3.5, 25)
55 (5.6, 41)
THREAD
Q'TY
DIA. (mm)
2 8
2 8
10 4
5 4
5 4
4 4
4 5
3 6
2 6
2 6
4 5
1 8
4 6
1 8
2 5
3 10
7 4
1 5
3 4
THREAD
Q'TY
DIA. (mm)
9 5
3 6
3 6
4 6
1 12
1 8
1 8
1 20
1 20
1 10
1 10
1 10
GENERAL INFORMATION
FASTENER TYPE
5 mm screw
6 mm screw
6 mm flange bolt
(8 mm head, small flange)
6 mm flange bolt
(8 mm head, large flange)
6 mm flange bolt (10 mm head)
and nut
8 mm flange bolt and nut
10 mm flange bolt and nut
TORQUE
N·m (kgf·m, lbf·ft)
9 (0.9, 6.6)
29 (3.0, 21)
1.0 (0.1, 0.7)
1.0 (0.1, 0.7)
1.0 (0.1, 0.7)
1.0 (0.1, 0.7)
1.6 (0.2, 1.2)
10 (1.0, 7)
10 (1.0, 7)
10 (1.0, 7)
9.3 (0.9, 6.9)
30 (3.1, 22)
12 (1.2, 9)
22 (2.2, 16)
5.2 (0.5, 3.8)
49 (5.0, 36)
1.0 (0.1, 0.7)
1.5 (0.2, 1.1)
1.0 (0.1, 0.7)
TORQUE
N·m (kgf·m, lbf·ft)
1.5 (0.2, 1.1)
10 (1.0, 7)
10 (1.0, 7)
12 (1.2, 9)
25 (2.5, 18)
13 (1.3, 10)
13 (1.3, 10)
18 (1.8, 13)
26 (2.7, 19)
16 (1.6, 12)
30 (3.1, 22)
10 (1.0, 7)
TORQUE
N·m (kgf·m, lbf·ft)
4.2 (0.4, 3.1)
9.0 (0.9, 6.6)
10 (1.0, 7)
12 (1.2, 9)
12 (1.2, 9)
27 (2.8, 20)
39 (4.0, 29)
REMARKS
See page 3-35
See page 3-33
U-nut
See page 3-33
See page 3-33
U-nut
REMARKS
Apply oil to the threads.
See page 4-12
Apply oil to the threads and
O-ring.
U-nut
ALOC bolt; replace with a
new one
1-13