Honda NSS250S Manual page 227

Hide thumbs Also See for NSS250S:

Table of Contents

maxiscooter-club.ru

5. To prevent damage and keep foreign matter out,

cover the disconnected connector and pipe end

with the plastic bags.

QUICK CONNECT FITTING

INSTALLATION

• Always replace the retainer of the quick connect

fitting when the fuel feed hose is disconnected.

• If any retainer needs replacing, use the same

manufacturer's retainer as the ones being

removed (The various manufactures feature dif-

ferent retainer specifications).

• Do not bent or twist the fuel feed hose.

• If the rubber cap or connector damper is dam-

aged or cut, replace it with a new one.

FUEL PUMP UNIT SIDE

1. Insert a new retainer into the connector.

• Align new retainer locking pawls with the con-

nector grooves.

2. Set the rubber cap to the fuel pipe as shown.

3. Install the connector to the fuel joint.

Then press the quick connect fitting onto the fuel

joint until both retainer pawls lock with a

If it is hard to connect, put a small amount of

engine oil on the fuel joint end.

FUEL SYSTEM (PGM-FI)

Chapters

Table of Contents