Honda NSS250S Manual page 401

Fill the bearing rolling area with oil.
Remove the bearings using special tools.
TOOLS:
Driver
Attachment, 42 x 47 mm
Pilot, 15 mm
CRANKSHAFT
REMOVAL
Separate the crankcase (page 14-5).
Remove the crankshaft from the left crankcase.
Remove the snap ring and oil seal from the left
crankcase.
maxiscooter-club.ru
07749-0010000
07746-0010300
07746-0040300
CRANKCASE/CRANKSHAFT/BALANCER
LEFT CRANKCASE:
DRIVER
RIGHT CRANKCASE:
BALANCER
GEAR BERING
CRANKSHAFT
SNAP RING
BALANCER GEAR
BEARING
ATTACHMENT/PILOT
DRIVER
ATTACHMENT/PILOT
OIL SEAL
14-7