Honda NSS250S Manual page 107

Disconnect the mechanical key cable.
Remove the screws and key cylinder stay.
Remove the E clip, cable stay, washer, set plate, key
cylinder stay, washer and key cylinder.
Remove the screws and fuel lid stay from the inner
cover.
Remove the screws and fuel lid from the stay.
INNER COVER
MECHANICAL KEY CABLE
SCREWS
CABLE STAY
E CLIP
Assembly is in the reverse order of removal.
TORQUE:
Left outer box screw:
1.0 N·m (0.1 kgf·m, 0.7 lbf·ft)
maxiscooter-club.ru
SCREWS
KEY CYLINDER
WASHER
KEY CYLINDER STAY
SET PLATE
WASHER
FRAME/BODY PANELS/EXHAUST SYSTEM
FUEL LID STAY
FUEL LID
SCREWS
INNER COVER
FUEL LID STAY
3-29