Install the lock nut.
Hold the steering stem adjusting nut using the pin
spanner then tighten the steering stem lock nut
using the socket wrench to the specified torque.
TOOLS:
Socket wrench
Pin spanner
TORQUE: 74 N·m (7.5 kgf·m, 55 lbf·ft)
Support the scooter securely and raise the front
wheel.
Make sure the steering stem moves smoothly with-
out play or binding.
Install the brake hose clamp and bolt, and tighten
the bolt.
Install the following:
Route the hoses,
cables and wire
– Handlebar post (page 15-11)
harness properly
– Inner cover (page 3-27)
(page 1-21).
maxiscooter-club.ru
07916-KM10000
07702-0020001
FRONT WHEEL/SUSPENSION/STEERING
LOCK NUT WRENCH
PIN SPANNER
BOLT
LOCK NUT
CLAMP
15-31