ALTERNATOR/STARTER CLUTCH
Remove the flywheel and starter driven gear as a
set, using a special tool.
TOOL:
Flywheel puller
Remove the special tool.
Remove the flywheel/starter driven gear assembly.
Remove the starter reduction gear and shaft.
Remove the woodruff key from the crankshaft.
• Be careful not to damage the groove of the
crankshaft.
DISASSEMBLY
Check the operation of the sprag clutch by turning
the driven gear.
You should be able to turn the driven gear clock-
wise smoothly, but the gear should not turn coun-
terclockwise.
Remove the starter driven gear from the starter
clutch on the flywheel while turning it clockwise.
13-10
maxiscooter-club.ru
07933-KM10001
FLYWHEEL PULLER
FLYWHEEL/STARTER
DRIVEN GEAR ASSEMBLY
STARTER REDUCTION GEAR
STARTER DRIVEN GEAR
SHAFT
WOODRUFF KEY
FLYWHEEL