Honda NSS250S Manual page 277

maxiscooter-club.ru
Installation is in the reverse order of removal.
• Route the hoses properly (page 1-21).
• When installing the radiator, align the tabs of the
radiator with the grommet of the frame.
Fill and bleed the cooling system (page 7-6).
DISASSEMBLY
Remove the radiator (page 7-14).
Remove the bolt/washers and fan motor/shroud
assembly.
Remove the wire band from the shroud.
Remove the screws and fan motor assembly.
Remove the nut and cooling fan.
COOLING SYSTEM
Align
BOLT/WASHERS
FAN MOTOR/SHROUD ASSEMBLY
SCREWS WIRE BAND
SHROUD FAN MOTOR ASSEMBLY
NUT
Align
COOLING FAN
7-15