Honda NSS250S Manual page 520

ABS (NSS250A)
PROBLEM CODE 31, 32, 33, 34, 37 or 38
(Solenoid Valve)
1. Failure Reproduction
Erase the problem code (page 18-9).
Test ride the scooter above 30 km/h (18 mph).
Retrieve the problem code (page 18-8) and
recheck the ABS indicator.
Does the indicator blink 31, 32, 33, 34, 37 or 38
times?
YES
NO
PROBLEM CODE 51, 52 or 53 (Pump
Motor)
1. Motor Power Input Voltage Inspection
Disconnect the ABS modulator 25P connector
(page 18-28).
Measure the voltage at the ABS modulator 25P
connector terminals of the wire side.
TOOL:
Test probe
CONNECTION: Black/green (+) – Green (–)
Is the battery voltage?
YES
NO
2. Motor Power Input Line Short Circuit Inspection
Check the continuity between the wire side ABS
modulator 25P connector of the wire side and
ground.
TOOL:
Test probe
CONNECTION: Black/green – Ground
Is there continuity?
YES
NO
18-20
maxiscooter-club.ru
– Faulty ABS modulator
– Solenoid valve is normal (intermittent
failure).
07ZAJ-RDJA110
– GO TO STEP 3.
– GO TO STEP 2.
07ZAJ-RDJA110
– Short circuit in Black/green wire
– • Open circuit in Green wire
• Intermittent failure (Replace the ABS
MOTOR fuse (30 A) and recheck.)
25P CONNECTOR
(Wire side/female terminals)
Black/green
25P CONNECTOR
(Wire side/female terminals)
ABS INDICATOR
Green
Green
Black/
green