CRANKCASE/CRANKSHAFT/BALANCER
ASSEMBLY
BALANCER
Apply molybdenum disulfide paste to the balancer
shaft sub-gear sliding surface.
Install the balancer shaft sub-gear and balancer
gear springs.
Install the washer and snap ring into the balancer
gear shaft groove.
• Check that the snap ring is seated in the groove.
• Do not reuse the snap ring which could easily
spin in the groove.
14-20
maxiscooter-club.ru
SPRINGS
SUB-GEAR
WASHER
SUB-GEAR
SNAP RING
SNAP RING
SPRINGS
WASHER