Honda NSS250S Manual page 499

maxiscooter-club.ru
HYDRAULIC BRAKE
Push the dust seal and piston seal in and lift them
Be careful not to
PISTON SEAL
out.
damage the piston
sliding surface.
Clean the seal grooves, caliper cylinder and piston
with clean brake fluid.
DUST SEAL
INSPECTION
Check the caliper cylinder for scoring, scratches or
CALIPER BODY
damage.
Measure the caliper cylinder I.D.
SERVICE LIMIT: 38.24 mm (1.506 in)
Check the caliper piston for scoring, scratches or
damage.
Measure the caliper cylinder piston O.D.
SERVICE LIMIT: 38.09 mm (1.500 in)
PISTON
ASSEMBLY
Replace with a new one if removed.
22 N·m (2.2 kgf·m, 16 lbf·ft)
CALIPER PISTON
DUST SEAL
PIN BOOT
CALIPER BRACKET
RETAINER
5.4 N·m (0.6 kgf·m, 4.0 lbf·ft)
BRAKE PADS
PISTON SEAL
CALIPER PIN
PIN BOOT
RETAINER
17-33