Installation Requirements - Ricoh V-C3 D081 Field Service Manual

2. Installation

Installation Requirements

Operating Environment
1. Temperature Range
2
• Allowed: 10°C to 32°C (50°F to 90°F)
• Recommended: 15°C to 25°C (59°F to 77°F) Rh 50%
2. Humidity Range:
• Allowed: 15% to 80% Rh
• Recommended: 30% to 70%
3. Ambient Illumination: Less than 1,500 lux (do not expose to direct sunlight or strong light.)
4. Ventilation: Air must be replaced a minimum of 3 times per hour
5. Ambient Dust: Less than 0.10 mg/m
6. If the installation area has air-conditioners or heaters, put the finisher in a location that agrees with
these conditions:
• Where there are no sudden temperature changes from low to high, or high to low.
• Where it will not be directly exposed to cool air from an air conditioner in the summer.
• Where it will not be directly exposed to reflected heat from a heater in the winter
7. Do not put the finisher where it will be exposed to corrosive gases.
168
3