Ricoh V-C3 D081 Field Service Manual page 740

3. Appendix: Service Call Conditions
SC921 D
3
SC925 B
Here is a list of HDD status codes:
Display Meaning
(-1) HDD not connected
(-2) HDD not ready
(-3) No label
(-4) Partition type incorrect
(-5) Error returned during label read or check
(-6) Error returned during label read or check
(-7) "filesystem" repair failed
(-8) "filesystem" mount failed
(-9) Drive does not answer command
(-10) Internal kernel error
(-11) Size of drive is too small
(-12) Specified partition does not exist
162
Printer Error 2: Font error
When the printer application started, the specified font could not be found on the
SD card.
• The specified font is not on the SD card
• SD card data corrupted
Net File function error *GW
The NetFile file management on the HDD cannot be used, or a NetFile management
file is corrupted and operation cannot continue. The HDDs are defective and they
cannot be debugged or partitioned, so the Scan Router functions (delivery of received
faxes, document capture, etc.), Web services, and other network functions cannot be
used.
HDD status codes are displayed below the SC code:
• Refer to the four procedures below (Recovery from SC 925).
GW