Appendix: Service Call Conditions; Service Call Tables; Sc Codes Group 1: Scanning - Ricoh V-C3 D081 Field Service Manual

3. Appendix: Service Call Conditions

Service Call Tables

SC Codes Group 1: Scanning

Exposure lamp error
SC101 D
The white level peak did not reach the prescribed threshold when the white plate was
scanned.
• Dirty optics
• Dirty white plate
• Exposure lamp defective
• Exposure lamp does not turn on
• Lamp stabilizer defective
• High voltage line leak
• SIOB defective
• SBU defective
Scanner home position error 1
SC120 D
The scanner home position sensor did not detect the home position (did not go OFF)
after the scanner moved forward 20 mm..
• Scanner motor defective
• Scanner HP sensor defective
• Harness between scanner motor and SIOB disconnected or broken.
• SIOB defective
Scanner home position error 2
SC121 D
The scanner home position sensor did not go ON after the scanner moved forward
6 mm and the feeler entered the HP sensor.
3
71