Tandem Tray Paper Size Change - Ricoh V-C3 D081 Field Service Manual

4. Replacement and Adjustments
1. Remove:
[A] Inner cover ( x2)
[B] Two side fences ( x1 each)
[C] Sensor bracket ( x1)
[D] Two sensors (

Tandem Tray Paper Size Change

4
At the factory, this tray is set for A4 or LT LEF so only A4 or LT LEF paper can be used for tandem feed at
this setting.
1. Open the front cover.
2. Pull out the tandem feed tray [A] out completely to separate the right tandem tray [B] from the left
tandem tray.
Right Tray
1. Remove the right tandem inner cover [C] ( x 2).
2. Re-position the side fences [D] ( x 1 each).
• A4: Outer slot position
• LT: Inner slot position
3. Re-install the right tandem inner cover.
438
x1 each, Pawls x4 each)