Ricoh V-C3 D081 Field Service Manual page 948

4. Appendix: Service Program Mode Tables
Save to HDD
5
Specifies the decimal key number of the log to be written to the hard disk.
Save to SD Card
6
Specifies the decimal key number of the log to be written to the SD Card.
Copy HDD to SD Card (Latest 4 MB)
Takes the most recent 4 MB of the log written to the hard disk and copies them to the SD Card.
9
A unique file name is generated to avoid overwriting existing file names on the SD Card. Up
to 4MB can be copied to an SD Card. 4 MB segments can be copied one by one to each SD
4
Card.
Copy HDD to SD Card Latest 4 MB (Any Key)
Takes the log of the specified key from the log on the hard disk and copies it to the SD Card.
10
A unique file name is generated to avoid overwriting existing file names on the SD Card. Up
to 4 MB can be copied to an SD Card. 4 MB segments can be copied one by one to each SD
Card. This SP does not execute if there is no log on the HDD with no key specified.
Erase HDD Debug Data
11
Erases all debug logs on the HDD
Erase SD Card Debug Data
Erases all debug logs on the SD Card. If the card contains only debugging files generated by
12
an event specified by SP5858, the files are erased when SP5857 010 or 011 is executed.
To enable this SP, the machine must be cycled off and on.
Free Space on SD Card
13
Displays the amount of space available on the SD card.
Copy SD to SD (Latest 4MB)
14
Copies the last 4MB of the log (written directly to the card from shared memory) onto an SD
card.
Copy SD to SD (Latest 4MB Any Key)
15
This SP copies the log on an SD card (the file that contains the information written directly from
shared memory) to a log specified by key number.
370