Machine Level - Ricoh V-C3 D081 Field Service Manual

2. Installation
2
6. If the installation area has air-conditioners or heaters, put the machine in a location that agrees with
these conditions:
• Where there are no sudden temperature changes from low to high, or high to low.
• Where it will not be directly exposed to cool air from an air conditioner in the summer.
• Where it will not be directly exposed to reflected heat from a heater in the winter
7. Do not put the machine where it will be exposed to gases that can cause corrosion.
8. Put the machine on a strong and level surface. The front and rear of the machine must be less than 5
mm (0.2") away from level.
9. Do not put the machine where there could be strong vibrations.
10. Do not connect the machine to the same power source as other electrical devices.
11. The machine can make an electromagnetic field, and this can cause interference with radio or
television reception.

Machine Level

1. Front to rear: Less than 5 mm (0.2") away from level
2. Right to left: Less than 5 mm (0.2") away from level
The machine legs can be turned to adjust them up or down, to make the machine level. Put a carpenter's
level on the exposure glass.
54