Ricoh V-C3 D081 Field Service Manual page 370

4. Replacement and Adjustments
4
• The four settings on each sticker must be entered for each new PCU.
• Execute only the SP codes on the sticker removed from the PCU and attached to the guide sheet.
(The sheet above shows four stickers attached, one for each PCU.)
• Do the SP codes only for the PCUs being replaced.
• If you replace only the development unit, you must also do these SP modes.
7. Follow the procedure in the main machine installation procedure to fill the PCU with developer and
initialize the developer. (
D082" under the "Installation" chapter)
368
"Filling the PCU Units with Developer" in the "Main Machine D081/