Ricoh V-C3 D081 Field Service Manual page 22

No.
B499
B699
B702
B703
B704
B756
B762
B830
B831
B835
D350
D373
20
Name
Tab Sheet Holder Type
3260
LCT Adapter
Punch Unit Type 3260
Output Jogger Unit Type
3260
Cover Interposer
Copy Tray
Mail Box CS391
Finisher SR5000
Punch Unit PU 5000
Cover Interposer Tray
CI5000
LCIT 4000
Finisher SR4040
Comments
For tandem tray (Tray 1), the top tray of the main
machine.
Required for installation of LCT B473.
For either finisher D373 or D374. Three models are
available (NA, EU, or SC).
Optional jogger unit attached to the left side of the
finisher. It can be attached to either finisher D373 or
D374 finisher.
Installed on top of either finisher D373 or D374. Mail
Box CS391 (B762) is also installed on the top of the
finisher, so the cover interposer and mailbox cannot be
installed together.
Holds paper output from the main machine. Must be
used if no finishers are installed on the left side of the
main machine.
Install on top of either the D373 or D374. Cover
Interposer (B704) is also installed on the top on the
finisher, so the cover interposer and mailbox cannot be
installed together.
3000 sheet capacity, 100 staples. External jogger is
provided pre-installed. Finisher Adapter Type C (D375)
is required. The output jogger is pre-installed on this
finisher (provided as standard).
Designed for the SR5000 (B830). Three types are
available (EU, NA, or SC).
Two source trays for feeding covers. Can be installed
and used for the SR5000 (B830) only. This cover
interposer tray can be installed on the Multi Folder
(D454) as well as the B830
Only one LCT can be installed on the right side of the
machine, the B473 or D350.
2000-sheet tray capacity, corner stapling, saddle-stitch
stapling, booklet folding and stapling.