3. Appendix: Service Call Conditions
SC502
B
3
SC503
B
SC504
B
102
Tray 2 (paper cassette) feed error (Japan Only)
The lift sensor is not activated within 10 seconds after the tray lift motor starts lifting the
bottom plate.
When the tray lowers, the tray lift sensor does not go off within 1.5 sec.
The lower limit sensor of the tandem tray does not detect the lower limit within 10 sec.
• Tray lift motor defective or disconnected
• Paper or other obstacle trapped between tray and motor
• Pick-up solenoid disconnected or blocked by an obstacle
Tray 1 feed error
The lift sensor is not activated within 10 seconds after the tray lift motor starts lifting
the bottom plate.
When the tray lowers, the tray lift sensor does not go off within 1.5 sec.
• Tray lift motor defective or disconnected
• Paper or other obstacle trapped between tray and motor
• Pick-up solenoid disconnected or blocked by an obstacle
Tray 2 feed error
The lift sensor is not activated within 10 seconds after the tray lift motor starts lifting
the bottom plate.
When the tray lowers, the tray lift sensor does not go off within 1.5 sec.
• Tray lift motor defective or disconnected
• Paper or other obstacle trapped between tray and motor
• Pick-up solenoid disconnected or blocked by an obstacle