Ricoh V-C3 D081 Field Service Manual page 163

Multi Folding Unit (D454)
Docking
2
1. Fasten the joint bracket [A] to the left side of the main machine [B] ( x4 M4x20).
2. Open the front door [A].
3. At the front right corner, remove the screw of the lock bar [B] ( x1 M3x6). Keep this screw.
4. Push in the lock bar.
5. Slowly push the unit [C] against the left side of the main machine so that the lock bar is directly and
squarely under the arms of the joint bracket.
6. Pull out the lock bar so it slides up into the notches in the arms on both ends of the joint bracket [D].
7. Fasten the lock bar by re-attaching the screw removed in Step 3 ( x1).
161