Ricoh V-C3 D081 Field Service Manual page 714

3. Appendix: Service Call Conditions
SC783-7 B
3
SC783-8 B
SC783-9 B
136
Reg. Roller Transport Motor Error
The motor drive PCB detected an error at the motor.
• Motor harness or connector loose, broken, defective
• Motor or motor drive board defective
Dynamic Roller Lift Motor Error
The dynamic roller HP sensor did not detect the dynamic roller in (or out of) its
home position within the prescribed time. The 1st occurrence causes a jam, and
the 2nd occurrence causes this SC code.
• Dynamic roller HP sensor dirty
• Sensor harness or connector loose, broken, defective
• Dynamic roller lift motor harness or connector loose, broken, defective
• Sensor defective
• Motor or motor drive board defective
Registration Roller Release Motor Error
The registration roller HP sensor did not detect the registration roller in (or out of)
its home position within the prescribed time. The 1st occurrence causes a jam, and
the 2nd occurrence causes this SC code.
• Registration roller HP sensor dirty
• Sensor harness or connector loose, broken, defective
• Registration roller release motor harness or connector loose, broken,
defective
• Sensor defective
• Motor or motor drive board defective
Multi Folder (D454)
Multi Folder (D454)
Multi Folder (D454)