Installation; Installation Requirements; Operating Environment - Ricoh V-C3 D081 Field Service Manual

2. Installation

Installation Requirements

Operating Environment

1. Temperature Range
• Recommended Temp.: 23°C (73.4°F)
• Allowed Temp.: 10°C to 32°C (50°F to 90°F) – See the Note below
2. Humidity Range: 15% to 80% Rh
3. Ambient Illumination: Less than 1,500 lux (do not expose to direct sunlight or strong light.)
4. Ventilation: Air must be replaced a minimum of 3 times per hour
5. Ambient Dust: Less than 0.10 mg/m
• If the machine is installed in a location where the ambient temperature is more than 30°C (86°
F).
• Do not run full color copying longer than 2 hours, and never turn the main power switch off
immediately after a long copy job.
• Leave the machine on so the fans can expel the hot air from the machine and cool the electronic
components.
3
2
53