4. Replacement and Adjustments
1. Remove the K_PCU from the machine and place it on the PCU stand. (
p.293 "Toner Hopper,
Faceplate, PCU")
4
2. Remove the front screw [A] and rear screw [B].
3. Remove the K_PCU cover.
4. Remove the charge unit [A], turn it upside down and place it on a flat, clean surface.
• The red arrow is pointing to the rear of the charge unit. This is the end with the two terminal
connectors.
5. Cover the exposed drum with a sheet of clean paper [B].
330