Ricoh V-C3 D081 Field Service Manual page 926

4. Appendix: Service Program Mode Tables
Operation Error, Incorrect
Setting
4
Error Caused by Response
from GW URL
Inst Clear
209
Releases the machine from its embedded RCG setup.
348
Inquiry, registration attempted without acquiring
-12002
device status.
Attempted registration without execution of an
-12003
inquiry and no previous registration.
Attempted setting with illegal entries for
-12004
certification and ID2.
-12005 @Remove communication prohibited
Confirmation requested again after confirmation
-12006
completed.
Different numbers were used for registration and
-12007
confirmation.
Update certification failed because device was
-12008
in use.
Attempted dial up overseas without the correct
-2385
international prefix for the telephone number.
-2387 Not supported at the Service Center
-2389 Database out of service
-2390 Program out of service
-2391 Two registrations for same device
-2392 Parameter error
-2393 External RCG not managed
-2394 Device not managed
-2395 Box ID for external RCG is illegal
-2396 Device ID for external RCG is illegal
-2397 Incorrect ID2 format
-2398 Incorrect request number format