Ricoh V-C3 D081 Field Service Manual page 804

4. Appendix: Service Program Mode Tables
Leading Edge Correction for Special Paper 1: K. Sets the leading edge correction coefficient
when bias is applied as far as allowed by the setting of SP2772 for drum to image transfer of the
image during black and white copying on Special Paper 1.
7 Side1:PTR
8 Side1:SepDC
9 Side1:SepAC
12 Side2:PTR
13 Side2:SepDC
4
14 Side2:SepAC
2772 LEdge SWT:Sp1:K
Leading Edge Switch Timing for Special Paper 1: K. Sets the switch off timing of SP2771. The
selected value is the number of mm from the leading edge. Applies only to printing in black-
and-white mode on Special Paper 1.
2 PTR
3 SepDC
4 SepAC
277
TEdge Cor:Sp1 K
3
Trailing Edge Correction for Special Paper 1: K. Sets the bias applied at the trailing edge when
the image is transferred from ITB to paper by setting the start timing for SP2774 at the trailing
edge. Applied to the trailing edge for black-and-white mode on Special Paper 1 only.
7 Side1:PTR
12 Side2:PTR
277
TEdge SWT:Sp1 K
4
226
[0 to 250/ 1%]
[0 to 30/1 mm]
[0 to 250/1%]