Ricoh V-C3 D081 Field Service Manual page 98

2. Installation
2
7. From the left tandem tray, remove the front cover [A] ( x 2).
8. Pull out the right tandem tray [B], then remove it ( x 2).
9. Put the short connector [A] into the socket in the machine [B].
• Hold the connector as shown in the illustration.
10. Install the A3/DLT tray [C] on the right rail [D], center rail [E], and left rail [F]. Use the screws that you
removed in Steps 6 and 8.
96