4. Replacement and Adjustments
Fusing Thermistors, Heating Roller Temperature Sensors
4
1. Remove:
• Fusing unit (
• Fusing unit cover (
• Fusing cleaning unit (
2. Open all the clamps (1) to (6) (
3. Disconnect harness [A] (
4. Disconnect:
[B] Hot roller thermistor ( x1)
[C] Heating roller thermistor bracket and thermistor ( x2)
5. Remove two heating roller temperature sensors [D] (no screws).
410
p.402)
p.412 "Fusing Lamps, Dividing the Fusing Unit")
p.406)
x6)
x1)