Ricoh V-C3 D081 Field Service Manual page 890

4. Appendix: Service Program Mode Tables
Enables or disables automatic print out without an accounting device. This SP is used when
the receiving fax is control by an external accounting device.
0: Automatic printing
1: No automatic printing
5169 CE Login
If you will change the printer bit switches, you must 'log in' to service mode with this SP before
you go into the printer SP mode.
[0 to 1/1]
4
0: Off. Printer bit switches cannot be adjusted.
1: On. Printer bit switches can be adjusted.
5188 Copy NV Version
Displays the version number of the NVRAM on the controller board.
5191 Mode Set DFU
5193 External Controller Info. Settings DFU
5195 Limitless SW DFU DFU
5196 90 Degree Rotation (Copy)
5199 Paper Exit After Staple End
5212 Page Numbering
3 Duplex Printout Left/Right Position
Horizontally positions the page numbers printed on both sides during duplexing.
[–10 to +10/1 mm]
0 is center, minus is left, + is right.
4 Duplex Printout High/Low Position
312