Ricoh V-C3 D081 Field Service Manual page 86

2. Installation
Attach the PCU Stand Rack and Store the PCU Stand
2
1. Hold the PCU stand rack [A] as shown, then attach it to the bottom of the machine (magnets hold it
in place).
2. Make sure long lock plate [B] and jig [C] are inserted into the bottom of the PCU stand.
3. Slide the PCU stand [D] into the rack below the main machine.
• The PCU stand provided with the machine must remain with the machine in the field because the
stand is required for servicing the PCU and OPC drum. After the PCU is removed from the
machine, it should always be placed on the PCU stand.
• The PCU stand protects the OPC drum while the PCU is out of the machine, and keeps the PCU
properly aligned so the development unit can be reattached easily after the OPC and PCU have
been separated.
• To prevent damage to the exposed OPC drum on the bottom of the PCU, always set the PCU
on the PCU stand designed for this machine. Do not use the PCU stand of any other machine.
84