Duplex Unit; Opening, Locking The Controller Box Cover - Ricoh V-C3 D081 Field Service Manual

Table of Contents

Advertisement

Duplex Unit

1. Open the front door.
2. Pull the duplex unit [A] out until it stops.
3. Remove the Teflon ring [B] from the left rear corner (
4. Remove the Teflon ring [C] from the right rear corner (
5. Lift the duplex unit from the rails and place it on a flat, level surface.

Opening, Locking the Controller Box Cover

• To prevent personal injury and damage to the controller box, when the controller box is open, it
should always be locked as described below. Before doing the procedure, always switch the machine
off and disconnect the power cord.
x1).
x1).
Common Procedures
4
303

Advertisement

Table of Contents
loading

This manual is also suitable for:

V-c3 d082

Table of Contents