Ricoh V-C3 D081 Field Service Manual page 729

Fatal kernel error
Due to a control error, a RAM overflow occurred during system processing. One of
the following messages was displayed on the operation panel.
• System program defective
• Controller board defective
• Optional board defective
• Replace controller firmware
0x5032
SC819 D
0x6261
554C
Note: For more details about this SC code error, execute SP5990 to print an SMC report so you can read
the error code list. The error code is not displayed on the operation panel.
HAIC-P2 decompression error
Error occurred in the compression/decompression module of ASIC
Veena in HAIC-P2.
If EFI (Fiery Controller) is connected, refer to the EFI manual. If EFI is not
connected:
• HDD defective
• System memory defective
HDD Defective
There was no response from HDD. The power supply to the HDD may
have been interrupted suddenly.
• Re-format HDD.
• Replace HDD
USB loader defect
USB loader was detected as defective.
Service Call Tables
GW
3
151