Ricoh V-C3 D081 Field Service Manual page 59

• Scanner heater (option)
• LCT (B473) heater (option)
• LCIT (D350) heater (option)
• Do not turn off the main power switch when the power LED is lit or flashing. To prevent damage to the
hard disk or memory, push the operation switch to turn the power off, then do nothing until the power
LED goes off, and then turn the main power switch off.
There are two power switches on the machine:
Main Power Switch
This is located on the front left corner of the machine and has a plastic cover. This switch must always be
on unless a technician does work on the machine.
Operation Switch
This is located on the right side of the operation panel. This is the switch that the customer uses to turn the
machine on and off.
Installation Requirements
57
2