Ricoh V-C3 D081 Field Service Manual page 937

IP Address (Primary)
Use this SP to set the Scan Router Server address. The IP address under the transfer tab can
2
be used with the initial system setting.
[0 to FFFFFFFF/1]
Delivery Error Display Time
Use this setting to set the length of time that the message is shown when a test error occurs
6
during document transfer with the NetFile application and an external device.
[0 to 999/1]
IP Address (Secondary)
8
Sets the IP address that is given to the computer that is the secondary delivery server for Scan
Router. This SP lets you set only the IP address, and does not refer to the DNS setting.
Delivery Server Model
Lets you change the model of the delivery server that is registered by the I/O device.
[0 to 4/1]
0: Unknown
9
1: SG1 Provided
2: SG1 Package
3: SG2 Provided
4: SG2 Package
Delivery Svr. Capability
Changes the functions that the registered I/O device can do.
[0 to 255/1]
Bit7 = 1 Comment information exits
Bit6 = 1 Direct specification of mail address possible
10
Bit5 = 1 Mail RX confirmation setting possible
Bit4 = 1 Address book automatic update function exists
Bit3 = 1 Fax RX delivery function exists
Bit2 = 1 Sender password function exists
Bit1 = 1 Function to link MK-1 user and Sender exists
Bit0 = 1 Sender specification required (if set to 1, Bit6 is set to "0")
Group 5000
4
359