Ricoh V-C3 D081 Field Service Manual page 519

Step
Middle (Middle ID) (K, C, M, and Y)
M
Adjust the offset value so that the density of level 6 matches that
of level 6 on the C-4 chart.
Shadow (High ID) (K, C, M, and Y)
S
Adjust the offset value so that the density of level 8 matches that
of level 8 on the C-4 chart.
Highlight (Low ID) (K, C, M, and Y)
Adjust the offset value so that dirty background is not visible on
H
the copy and the density of level 3 is slightly lighter that of level
3 on the C-4 chart.
Copy: Letter (SC) (Text Single Color Mode)
Step
ID max: (K)
IDMax
Adjust the offset value so that the density of level 10 matches
that of level 10 on the C-4 chart.
Middle (Middle ID) (K)
M
Adjust the offset value so that the density of level 6 matches that
of level 6 on the C-4 chart.
Shadow (High ID) (K)
S
Adjust the offset value so that the density of level 8 matches that
of level 8 on the C-4 chart.
Highlight (Low ID) (K)
Adjust the offset value so that dirty background is not visible on
H
the copy and the density of level 3 is slightly lighter that of level
3 on the C-4 chart.
After "Shadow" adjustment, if text in the test pattern does not print clearly:
• Check to determine whether the 5 line/mm pattern at each corner is printed clearly.
• If it is not, adjust the offset value of 'shadow' again until the pattern prints clearly.
• Printer Mode
There are eight adjustable modes. Select these modes with in the Printer SP mode with SP1102:
Item to Adjust
Item to Adjust
Image Adjustments
Level on the C-4 chart (K)
Level on the C-4 chart (K)
4
517