3. Appendix: Service Call Conditions
SC874
D
3
SC875
D
158
Delete All error 1: HDD
A data error was detected for the HDD/NVRAM after the Delete All option was used.
Note: The source of this error is the Data Overwrite Security Unit running from an SD
card.
• Turn the main switch off/on and try the operation again.
• Install the Data Overwrite Security Unit again..
• HDD defective
Delete All error 2: Data area
An error occurred while the machine deleted data from the HDD.
Note: The source of this error is the Data Overwrite Security Unit D377 running from
an SD card.
• Cycle the machine off/on.
• Try the operation again.
GW
GW