Ricoh V-C3 D081 Field Service Manual page 831

9 K % Remain
10 M % Remain
11 C % Remain
12 Y % Remain
3411 TNE Detect Disp/Set
This SP sets the number of pages to print after the toner near-end alert has been issued.
1 TNE:K Sheets
2 TNE:YMC Sheets
3 K Pg Count
4 M Pg Count
5 C Pg Count
6 Y Pg Count
7 Disp Timing:K
8 Disp Timing:M
9 Disp Timing:C
10 Disp Timing:Y
3412 TE Detect:Disp/Set
These SP codes determine how many pages print before toner supply reaches toner end.
1 TE:Sheets:Min:K
2 TE:Sheets:Min:Col
These SP codes display the percent of toner remaining.
[0 to 100/ 1%]
Sets toner end to be measured by the number of sheets printed
(toner end sensor input is ignored).
[0 to 30/ 1 Sheet]
Displays the number of continuous sheets detected for toner
end while the toner end sensor input is ignored.
[0 to 30/ 1 Sheet]
This setting displays the percentage of toner remaining for
toner near end.
[0 to 100/ 1%]
These SPs set the minimum number of monochrome
and color pages guaranteed to print after the
machine has determined near end until the toner-end
message is displayed.
[0 to 50 / 10/ 1 Sheet]
Group 3000
4
253