Belt Position Sensor - Ricoh V-C3 D081 Field Service Manual

• When you reattach the support bracket [A], rotate the screw [B] up as shown, then tighten it.
• Do the forced MUSIC adjustment with SP2111-1.

Belt Position Sensor

1. Remove:
• ITB
[A] Belt position sensor assembly ( x2,
Reinstallation
After the reinstallation of the new sensor, do the following SP codes:
• SP2912-1 (Encoder Sn: Adj Light)
• SP2914-1 (Encoder Sn Get 1st Phase)
• SP2111-1 (Forced MUSIC Adjustment)
x1)
Image Transfer Unit
4
397