Ricoh V-C3 D081 Field Service Manual page 503

Motors
1. Remove the plate that holds the DRB [A] and DTMB [B] ( x2, x All)
4
1. Remove the fan plate with fan [A] attached ( x2).
2. Disconnect the drum motors [B] ( x4).
3. Disconnect the cross-brace [C]. (There are two screws on each end of the cross-brace.)
• Do not release the harnesses that are permanently locked. Release only enough harnesses so
you can pull the cross-brace [D] away from the machine so that you can see the ITB motor [E].
501