Ricoh V-C3 D081 Field Service Manual page 713

3rd Stopper Motor Error
The 3rd stopper HP sensor did not detect the 3rd stopper in (or out of) its home
position within the prescribed time. The 1st occurrence causes a jam, and the 2nd
occurrence causes this SC code.
SC783-2 B
• 3rd stopper HP sensor dirty
• Sensor harness or connector loose, broken, defective
• 3rd stopper motor harness or connector loose, broken, defective
• Sensor defective
• Motor or motor drive board defective
1st Fold Motor Error
The motor drive PCB detected an error at the motor.
SC783-3 B
• Motor harness or connector loose, broken, defective
• Motor or motor drive board defective
2nd Fold Motor Error
The motor drive PCB detected an error at the motor.
SC783-4 B
• Motor harness or connector loose, broken, defective
• Motor or motor drive board defective
Crease Motor Error
The motor drive PCB detected an error at the motor.
SC783-5 B
• Motor harness or connector loose, broken, defective
• Motor or motor drive board defective
Dynamic Roller Transport Motor Error
The motor drive PCB detected an error at the motor.
SC783-6 B
• Motor harness or connector loose, broken, defective
• Motor or motor drive board defective
Service Call Tables
Multi Folder (D454)
Multi Folder (D454)
Multi Folder (D454)
Multi Folder (D454)
Multi Folder (D454)
135
3