Ricoh V-C3 D081 Field Service Manual page 534

6. Troubleshooting
No. Display
41 Download Error E41
Module ID
Card No. xx/xx
42 Download Error E42
Module ID
Card No. xx/xx
43 Download Error E43
Module ID
Card No. xx/xx
6
44 Download Error E44
Module ID Card No.
50 No Valid Data E50
51 (no display)
532
Error Description/Recovery
Download result failure 2
Fax download failure.
Recovery
• Cycle the machine off/on and re-try
Download result failure 3
Operation panel or language download failed. For this error,
sometimes the message may not be displayed.
Recovery
• Cycle the machine off/on and re-try
Download result failure 4
Print download failed.
Recovery
• Cycle the machine off/on and re-try
Download result failure 5
The data targeted for the write operation could not be accessed.
Recovery
• Turn the machine power off/on.
• Replace the SD card with the start-up SD card that has the source
data
• Set controller DIPSW-1 to ON to force the machine to write
• If you cannot force the machine to write, replace the controller
board.
Download invalid
The source data for the update could not be authenticated.
Recovery
• Use the correct SD card.
Remote ROM update failure 1
The source data for the ROM update is corrupted because the machine
is operating and an SC code has been issued.
Recovery
• Cycle the machine power off/on and try again.