4. Appendix: Service Program Mode Tables
1159
Fusing SC Settings
These SP codes determine whether the fusing unit SC codes are displayed.
1 SC On:1/Off:0 for 3 Jams
4
SC On:0/Off:1 for No Fusing
2
Pressure
1201
CPM Down DFU
Adjusts the CPM down.
1 L Temp:Judge Down Temp
2 L Temp:Judge Up _Temp
3 L Temp:1st CPM Down
4 L Temp:2nd CPM Down
5 L Temp:3rd CPM Down
6 Unit Low Temp:Judge Temp
7 H Temp:1st CPM Down
8 H Temp:2nd CPM Down
9 H Temp:3rd CPM Down
178
This SP determines whether the machine stops and displays
an SC if three consecutive jams occur in the fusing unit.
[0 to 1/0/1]
0: Disable. SC code is not displayed.
1: Enable. SC code is displayed.
This SP determines whether an SC is displayed if the fusing
pressure mechanism is not operating.
0: Enable. SC code is displayed.
1: Disable. SC code is not displayed.
Note: A jam does not necessarily occur in the fusing unit if
the pressure roller lift mechanism is not operating.
Down Judgment Temp
Up Judgment Temp
CPM
Judgment Temp
CPM