Rear Covers; Toner Hopper, Faceplate, Pcu - Ricoh V-C3 D081 Field Service Manual

Rear Covers

1. Remove:
[A]: Rear upper cover ( x3)
[B]: Rear lower cover ( x2)
• Remove the bottom screws
• Do not remove the shoulder screws.

Toner Hopper, Faceplate, PCU

Removing Hopper, Faceplate, PCU
• To avoid damaging the toner end sensor, make sure that the main power switch is turned off and that
the power cord is disconnected from the power source before you remove the hopper.
Common Procedures
4
293