Ricoh V-C3 D081 Field Service Manual page 825

ID Sensor Pattern Coverage Display.
Displays the amount toner to be used (coverage) to create the ID sensor patterns between
pages. The ID sensors cannot accurately detect the patterns if there is too much reflectivity
from the black toner. This SP changes the solid ID sensor pattern to a hatched pattern.
Note: SP3101-1 to 4 sets detection and update timing for the creation of the ID sensor
patterns.
1 Applied:K
2 Applied:M
3 Applied:C
4 Applied:Y
5 Target Apply:K
6 Target Apply:M
7 Target Apply:C
8 Target Apply:Y
3102 ID Pattern:Int
These SP patterns set the time interval for creation of the ID sensor pattern on the drum.
1 Create Int:K
2 Create Int:M
3 Create Int:C
4 Create Int:Y
5 K Page Cnt
6 M Page Cnt
7 C Page Cnt
8 Y Page Cnt
3111 ID Sn:Voffset DFU
Displays the output voltage of the directly reflected light when the LED of the ID sensor is
switched off.
[0 to 200/10/ 1 page]
[0 to 200/0/ 1 page]
Group 3000
4
247