4. Replacement and Adjustments
Image Transfer Unit
Emptying the Dust Collection Unit
4
1. Open the front door.
2. Pull out the drawer unit.
3. Insert a sheet of A3 paper [A] under the dust collection unit.
4. Disconnect the dust collection unit [B].
5. Dump the paper dust from the dust collection unit [C] onto the paper [D].
6. Carefully remove the paper and discard.
Separating the Belt Unit and Belt Cleaning Unit
Disassembly and ITB Replacement
1. Put a clean sheet of paper on a flat surface.
2. Remove the ITB from the machine.
3. Place the ITB unit on the sheet of paper.
To prevent spilling used toner, always hold the unit level when you remove it, lift it, carry it, or set it
down.
384