Ricoh V-C3 D081 Field Service Manual page 964

4. Appendix: Service Program Mode Tables
Punch Position Adjustment
Adjusts the punch hole positions in the direction of paper feed.
• NA: North America
• DOM: Japan
• EU: Europe
• SCAN: Scandinavia
1 2-Hole:DOM
2 3-Hole:NA
4
3 4-Hole:EU
4 4-Hole:SCAN
5 2-Hole:NA
6102 Punch Hole Reg 1
This SP corrects punch hole alignment by correcting the skew of each by adjusting the amount
of time the finisher entrance roller remains off while the exit roller of the machine remains on.
This buckles the leading edge of the sheet slightly against the finisher entrance roller while it
remains off.
386
[-75 to +75/0.5 mm]
+ Value: Shifts punch unit in the direction of feed.
- Value: Shifts punch unit against direction of feed.
Punch B702 for Finishers D373/D374