Sd Card Storage - Ricoh V-C3 D081 Field Service Manual

4. Replacement and Adjustments
4
1. Turn off the main power switch and disconnect the power cord.
2. Remove the rear covers.
3. Remove controller box screws (1), (2), and (3).
4. Open the controller box [A] to the left until it stops.
• Obey the warning on the decal to avoid touching the fan blades when you open and close the
controller box.
5. Remove the left screw [B].
6. Rotate the plastic stopper [C] counter-clockwise until it is aligned with the hole below and its tip [D]
is touching the machine frame.
7. Reattach the screw removed in Step 5 to lock the arm in position.
Reinstallation
• Before closing the controller box, reattach the stopper arm at its original position.

SD Card Storage

After an application has been moved from its original SD card to another SD card with SP5873-1, the
empty SD card should be stored on site inside the front door of the machine.
304