Ricoh V-C3 D081 Field Service Manual page 807

These SPs set the paper size correction coefficient for the image to paper transfer bias threshold
values calculated based on the reading of the absolute humidity from the temperature/humidity
sensor and the thresholds set with SP2304.
SP2780 – Up to SP2304 001: Threshold 1
SP2781 – More than SP2304 001 Threshold 1, up to SP23204 002 Threshold 2.
SP2782 – More than SP2304 002 Threshold 2, up to SP2304 003 Threshold 3
SP2783 – More than SP2304 003 Threshold 3, up to SP2304 004 Threshold 4
SP2784 – More than SP2304 004 Threshold 4, up to SP2305 005 Threshold 3
SP2785 – More than SP2304 005 Threshold 5
These settings apply only to the image area printed on Special Paper 1 in black-and-white
mode.
1 ITB
7 Side1:PTR
8 Side1:SepDC
9 Side1:SepAC
12 Side2:PTR
13 Side2:SepDC
14 Side2:SepAC
2790 Sp1:FC:LLL
2791 Sp1:FC:LL
2792 Sp1:FC:ML
2793 Sp1:FC:MM
2794 Sp1:FC:MH
2795 Sp1:FC:HH
[10 to 200/ 1%]
Special Paper 1: FC Very Low
Special Paper 1: FC Low
Special Paper 1: FC Medium Low
Special Paper 1: FC Medium
Special Paper 1: FC Medium High
Special Paper 1: FC High
Group 2000
4
229