Ricoh V-C3 D081 Field Service Manual page 812

4. Appendix: Service Program Mode Tables
282
TEdge Cor:Sp2 FC
8
Trailing Edge Correction for Special Paper 2: FC. Sets the strength of the bias coefficient for the
bias applied at the trailing edge when the image is transferred from ITB to paper. Applied when
printing in full-color mode on Special Paper 2.
7 Side1:PTR
12 Side2:PTR
282
TEdge SWT:Sp2 FC
4
9
Switch Timing for Special Paper 2: FC. Sets the switch timing that determines the distance from
the leading edge where the SP2828 settings are applied during image transfer from ITB to paper.
Applied only when printing in full-color mode on Special Paper 2.
[-100 to 0/1 mm]
2830 Sp2:K:LLL
2831 Sp2:K:LL
2832 Sp2:K:ML
2833 Sp2:K:MM
2834 Sp2:K:MH
2835 Sp2:K:HH
These SPs set the paper size correction coefficient for the image to paper transfer bias threshold
values calculated based on the reading of the absolute humidity from the temperature/humidity
sensor and the thresholds set with SP2304 8.
SP2830 – Up to SP2304 001: Threshold 1
SP2831 – More than SP2304 001 Threshold 1, up to SP23204 002 Threshold 2.
SP2832 – More than SP2304 002 Threshold 2, up to SP2304 003 Threshold 3
SP2833 – More than SP2304 003 Threshold 3, up to SP2304 004 Threshold 4
SP2834 – More than SP2304 004 Threshold 4, up to SP2305 005 Threshold 3
SP2835 – More than SP2304 005 Threshold 5
These settings apply only to the image area printed on Special Paper 2 in black-and-white
mode.
234
[0 to 250/1%]
Special Paper 2: K Very Low
Special Paper 2: K Low
Special Paper 2: K Medium Low
Special Paper 2: K Medium
Special Paper 2: K Medium High
Special Paper 2: K High