Ricoh V-C3 D081 Field Service Manual page 429

2. Remove:
[A] Jogger fences ( x 1 ea.)
[B] Left transport cover ( x 2)
• The front screw is a shoulder screw. Insert the screws in the correct holes when re-attaching.
• To avoid breaking the tabs under the left edge of the table, pull the table to the right to disengage
the tabs and then remove.
3. Remove:
[C] Transport sensor 1 (
[D] Transport sensor 2 (
[E] Inverter exit sensor ( x 1,
Reinstallation
• Make sure the end tabs [F] of the left transport cover are engaged correctly.
x 1, x 1)
x 1, x 1)
x 1, x 1)
Duplex Unit
4
427