Ricoh V-C3 D081 Field Service Manual page 69

• The instruction sheet protects the PTR during shipping and is also an important reminder that the
stabilizing rod must be already removed before this sheet is removed.
• If the stabilizing rod has not been removed, do this now. See Step 11 of the previous section.
• Never push the drawer into the machine until the stabilizing rod has been removed. Pushing the
drawer into the machine with the stabilizing rod in the machine will damage the ITB and PTR.
4. Raise lever D2 [A] of the fusing unit.
5. Turn knob D1 [B] in the direction shown by the arrow.
6. Remove protective sheet [C] with tape and red tag.
7. Lower lever D2 [A].
8. Push the drawer into the machine until it stops.
9. Rotate handle B2 up and to the right until it stops.
Main Machine D081/D082
2
67